• SEW image

  • Properties & technical data
  • Benefits & areas of application
  • Communication
  • Digital motor and data integration
  • MOVIKIT® software modules
  • Functional safety
  • Further options
  • Topologies
  • Product labels
  • Ambient conditions

Properties

  • Tried-and-tested modular system: Synchronous motor, decentralized inverter and optional gear unit combine to create a drive unit.
  • Gear unit variant:
    • Suitable for combining with all series 7 and 9 standard gear units
    • Compatible with helical-bevel servo gear units
  • Brake variant:
    • Available with BZ3 brake
    • Option of manual brake release with automatic disengaging function
    • Brakemotors can absorb regenerative energy, making internal braking resistors superfluous
  • MOVILINK® DDI: The digital motor interface that saves you valuable time by eliminating the need for manual motor startup.
  • MOVIKIT®: The software modules that make it possible to have a standardized communication interface in the MOVI‑C® modular automation system.
  • Speed setting range:
    • 1:40 (without encoder)
    • 1:2000 (with encoder)
  • Connection voltage: 380 V – 500 V at 50/60 Hz (also available as IT system variant)
  • Overload capacity up to 300%
    • Prevents oversizing in static operation
    • Reduces installed size of necessary supply infrastructure
    • Avoids overloading thanks to integrated safety mechanisms

Technical data

Close table
  CM3C80S CM3C80M
CM3C80M 2 A (0020) 2.5 A (0025) 3.2 A (0032) 4.0 A (0040) 4.0 A (0040) 5.5 A (0055)
Nominal power
kW		 0.75 0.94 1.19 1.51 1.68 1.88
Nominal torque
Nm		 3.6 4.5 5.7 7.2 8 9
Overload capacity
%		 300 300 300 300 300 300
Motor efficiency 89.1% ≙ IE5 90.0% ≙ IE5 90.4% ≙ IE5 87.6% ≙ IE5 87.9% ≙ IE5 88.4% ≙ IE5
Speed setting range without encoder 1:40 1:40 1:40 1:40 1:40 1:40
Speed setting range with encoder 1:2000 1:2000 1:2000 1:2000 1:2000 1:2000
Mass without brake
kg		 14.19 14.19 14.19 14.64 17.03 17.03
Mass with brake
kg		 22.8 22.8 22.8 23.3 25.7 25.7
We have stored a table for you here.

Areas of application

Boasting impressive flexibility and overload capacity, MOVIMOT® performance is our go-to expert for dynamics. It is ideal for all applications – from intelligent conveyor axes and simple lifting axes to positioning axes. An increased degree of protection, quiet operation without a fan and maximum energy efficiency result in an even wider range of applications.

Communication/installation variants:

  • DFC – direct fieldbus communication
  • (PROFINET, EtherNet/IPTM, Modbus TCP, POWERLINK/CiA 402)
  • DBC – direct binary communication
  • DAC – direct AS-interface communication
  • DSI – direct system bus installation (EtherCAT®/SBusPLUS, EtherCAT®/CiA 402)

Digital and analog inputs/outputs:

  • DFC/DSI: Up to 4 digital inputs and up to 2 digital inputs or outputs
  • DBC: 4 digital inputs / 1 relay output and 1 analog input (0 – 10 V, 0 – 20 mA, 4 – 20 mA)
  • DAC: 4 digital inputs / 1 relay output

Integrated digital interface

Digital motor and data integration

Data transfer between motor and inverter

The MOVILINK® DDI integrated digital interface means no additional installation is required for transfer of the electronic nameplate and various sensor signals between motor and inverter.

MOVIKIT® software modules

SEW image

The "Drive" category includes MOVIKIT® software modules that are operated directly on the MOVITRAC® advanced standard inverter:

  • MOVIKIT® Positioning Drive: MOVIKIT® Positioning Drive enables positioning applications with a standardized fieldbus interface.
  • MOVIKIT® RapidCreepPositioning Drive: MOVIKIT® RapidCreepPositioning Drive is a software module for implementing classic "rapid/creep speed positioning" without a motor encoder.
  • MOVIKIT® Velocity Drive: MOVIKIT® Velocity Drive allows you to use applications with velocity control and a standardized fieldbus interface.

Functional safety overview

  • Integrated STO (Safe Torque Off) safety function to IEC 61800-5-2
  • Safety Integrity Level 3 to EN 61800-5-2:2017 and EN 61508:2010
  • PL e to EN ISO 13849-1:2015
  • Optionally available with PROFIsafe and FSoE
  • In preparation: CIP safety

Available options

Encoder option

  • Single-turn encoder /EZ2Z
  • Multi-turn encoder /AZ2Z

Optional plug connectors

  • AC 400 V supply with M15 or M23 plug connectors
  • Safe Torque Off (STO) with M12 plug connectors (A-coded, 5-pin)
  • DC 24 V backup voltage with M12 plug connectors (L-coded, 5-pin)
  • M23 plug connectors for hybrid installation
  • All plug connectors can also be used for further looping.

DynaStop® option

  • Optionally available with the DynaStop® electrodynamic retarding function

Further options

  • Optionally available as a brakemotor (including manual brake release)
  • Optionally available with surface protection OS1, OS2, OS3 or OS4

Topologies

From control technology to inverters and drives, whether centralized or decentralized, there are no language barriers with any of the components from the MOVI-C® modular automation system.

Plan the design of your machines or systems with a single control, communication or installation topology. Our hardware and software will ensure seamless integration/assimilation and simply get things moving.

Even with large, decentralized systems, complete individuality is no problem. The MOVIMOT® performance drive unit offers interfaces to any communication bus. Direct connection to the controller is just one of many options.

Certifications / conformity

  • Country certifications
  • CE (Europe)
  • CMIM (Morocco)
  • RCM (Australia)
  • UKCA (Great Britain)
  • UL approval (USA and Canada)
  • EAC (Russia, Belarus and Kazakhstan)
  • UA.TR (Ukraine)

Ambient conditions

  • Degree of protection: Standard IP65 to EN 60529
  • Ambient temperature: -25 °C to +60 °C
  • Sustainability & excellent energy-saving potential:
    • Drive system efficiency to IEC 61800-9-2 (Power Drive System): The highest defined efficiency class IES2 to IEC 61800-9-2 for the system combining motor and electronics
    • Motor efficiency to IEC 60034: Complies with energy efficiency class IE5 to IEC TS 60034-30-2

Configure your customized product

  • Detailed information about your customized product
  • CAD data and documentation for your configuration
  • Option to directly request a quotation or place an order
Configure product now
Back to top
Back to top